|
Turnigy 420 Balancer/Charger 2S~4S |
|
$ 79.76 USDSKU: Turnigy-420 The Turnigy 420 is a simple and easy to use balance charger which can handle 2 to 4 cells and charge at a rate of 2A.
With an input voltage of around 12v you will be able to use wall adapters or a car battery to power this unit. The 420 will also show you battery percentage full during charge. You wont need any complicated wire systems to use this charger. Just plug in the balance plug, set the desired charge rate and youre done! A very easy to use and robust system! Spec. This charger charges via the balance plug which is a JST-XH style. All Zippy and Rhino batteries will fit.
Note: Power supply not included.
|
|
GT A-6-10 200W Balance charger & discharger |
|
$ 83.99 USDSKU: GT-A6-10 The GT A6 is a very advanced charger, able to charge, balance and discharge Lion, LiPo, LiFe (A123), NiCd and NiMH batteries on a maximum output power of 200W.It can charge or discharge up to 18 cells of NiCd / NiMH and 6 series of lithium batteries with maximum current of 10A. It can accept three types of Lithium batteries (Lilo/Lipo/LiFe). Features; Spec. This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, Loong Max and any pack with a JST adapter.
Note: Power supply not included.
|
|
Turnigy 4x6S Lithium Polymer Battery Pack Charger |
|
$ 145.99 USDSKU: TQ4 Turnigy 4x6S can charge four batteries packs simultaneously!
A quality designed charger with accurate balancing and a familiar, intuitive menu system. The Turnigy 4x6 is equipped with 4 high accuracy microprocessors to charge each battery individually. Its efficient cooling system ensures safe operation throughout the charge cycle.
With the Turnigy 4x6 you are able to balance charge a lipoly pack on Port-1 while series charging a LiFePo4 or NiMH battery on Port-2. All ports work independently of each other.
Specification: Operating voltage range: DC 11~15V
Power source: 12V DC (car battery) / AC mains PSU (>200Watts)
Cell count : 1-15 Ni-xx / 1-6 Li-xx / 1-10 Lead acid cells (2~20V)
Current drain for balancing li-xx: 335mA
Charge termination Ni-xx: Automatic, negative Delta Peak method
Charge termination Lead acid & Li-xx: Automatic, voltage dependent, CC-CV process
Maximum Charge Current per port: 6A High velocity heatsink exhaust fan. Including; 1 x TQ4 charger
1 x JST XH Adapter
1 x TP/FP Adapter
1 x Banana plug w/ Male Tamiya
1 x Banana plug w/ Female Mini JST
1 x Banana plug w/ Female Futaba
1 x Banana plug w/ Aligator clip
1 x Banana plug w/ Losen wires
1 pair Aligator clip
Note: Power supply not included. All accessories shown in image are included. |
|
iCharger 106B-plus 250W 6s Balance/Charger |
|
$ 125.99 USDSKU: iCharger106B Capable of handling up to 250W or 10A charge rates. Lipoly, LiFe and Lilo compatible as well as able to charge up to 6 cell packs.
The iCharger is famous for its ultra-accurate balancing feature. Each unit is calibrated at the factory prior to shipping! This is a quality precision charger. Spec. Input voltage range : 10.0 – 18.0VDC Charge current range : 0.05 – 10.0A Discharge current range : 0.05 – 7.0A Maximum charge power capacity : 250W @ input voltage > 13.5V Maximum discharge power capacity : 20W Maximum extern discharge power capacity : 170W @ 20V/7A Current drain for balancing : <300mA Balance accuracy : <10mV Lithium (LiPo/LiIo/LiFe) battery cell count : 1 – 6 series NiCd/NiMH battery cell count : 1 – 17 series Pb battery cell count : 1 – 12 series (2 – 24V) Battery setup memories : 10 Intelligent temperature control : Yes PC Connect : USB port Weight : 350g Dimensions (L X W X D) : 134X83X25mm Included. 106B Balance Charger/Discharger 2 Aligator clips Banana leads Temp Probe CD Note: Power supply not included.
|
|
Turnigy TURNIGY MEGA 400W V2 Lithium Polymer Battery Charger (Version 2) |
|
$ 110.00 USDSKU: T400W-V2 Take advantage of the new high C charge rate on the new Zippy, Turnigy, and Tunrigy Nano-Tech battery packs with the new Turnigy Mega 400W V2 charger. Note: Temperature sensor not included. Spec. Including; This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT,TURNIGY and any pack with a JST adapter. . |
|
HobbyKing ECO8 150W 7A 8S Bal/Dis/Cyc Charger w/ acc. |
|
$ 56.99 USDSKU: HKB8Pro Capable of charging any size Lipoly battery up to 8 cells or at 7A. Note: Power supply not included. |
|
HobbyKing 50watt 5A X-Charger/Balancer |
|
$ 30.99 USDSKU: HKX-Charger The HobbyKing HKC6 charger/balancer features programing functionality found in more expensive chargers at a fraction of the cost. Includes plugs and leads as shown. |
|
Turnigy Accucel-8 150W 7A Balancer/Charger |
|
$ 62.44 USDSKU: Accucel8150 The Accucel-8150 is a Lipoly/LiFe battery charging workhorse. Capable of handling up to 8S, 7A or a maximum of 150W charging current plus it balances and discharges packs which is critical for keeping your expensive batteries in perfect condition. ATTENTION. Spec. This charger has a JST-XH charge plug, which makes it compatible with Zippy, TURNIGY and any pack with a JST adapter, balance ports are for 3s~8s packs only. |
|
HobbyKing 3S 4 Channel Balance Charger |
|
$ 67.24 USDSKU: HK-X304 The HK-3x4 is the perfect balance charger for anyone who uses 3S Lipoly batteries frequently. The large, easy to read, back lit LCD provides up to the minute charging information for each cell on up to 4 packs all on the same screen, no need to scroll between screens to see the voltage for each cell during charging. |
|
Turnigy X5 3S 5 port Lithium polymer Battery Charger |
|
$ 49.23 USDSKU: T-X5-3S Charge and balance up to 5 3S Lipoly packs at the same time!
Great for 3,000mAh or smaller packs and perfect for people that want to stay in the air for longer without having to wait for their next battery to charge up! Because this charger is limited to 3A, it can charge through the balance wires, making connection simple and fast. No need to mess around with buttons and LCD screens, just plug in your pack and youre already charging. This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT,TURNIGY and any pack with a JST adapter.
Spec.
Input voltage: 13.5~18V DC
Charge Current: 1.0~3.0A Adjustable in each channel
Max power: 190W/15A
Balance precision: 10mV
|
|
Genuine IMAX B8+ Charger/Discharger 1-8 Cells |
|
$ 69.99 USDSKU: IMAXB8 THIS IS A REAL AND GENUINE IMAX B8! Spec. This charger has a JST-XH charge plug, which makes it compatible with Zippy, HXT, Loong Max and any pack with a JST adapter |
|
B6-AC Plus - Charger/Discharger 1-6 Cells Dual Power (COPY) |
|
$ 57.43 USDSKU: FY-B6AC This is a copied B6-AC Plus charger. Features; Spec. This charger has JST-XH Balance ports built-in which makes it compatible with Zippy, TURNIGY, nano-tech and any pack with a JST adapter. |
|
HobbyKing ECO6 50W 5A Balancer/Charger w/ accessories |
|
$ 52.99 USDSKU: ECO6 Capable of charging any size Lipoly battery up to 6 cells or at 5A. Spec. Note: Power supply not included. |
|
Turnigy balancer & Charger 2S-3S |
|
$ 10.49 USDSKU: Turnigy-3S Turnigy balancer & Charger 2S-3S |
|
HobbyKing ECO 4 x 6S Lithium Polymer Multi Charger |
|
$ 110.00 USDSKU: ECO-4PORT HobbyKing ECO 4x6 is our best value 4 port charger yet!
The Eco 4x6 can charge four batteries packs simultaneously no matter what battery type you have. The ECO 4x6 is equipped with 4 microprocessors to charge each battery individually. Its efficient cooling system ensures safe operation throughout the charge or discharge process.
With the ECO 4x6 youre able to balance charge a lipoly pack on Port-1 while series charging a LiFePo4 or NiMH battery on Port-2. All ports work independently of each other.
The HobbyKing ECO 4x6 includes 2 x JST-XH balance adapters and a charge lead set. Specification:
Operating voltage range: DC 11~15V
Power source: 12V DC (car battery) / AC mains PSU (>200Watts)
Charge power: 50watts, current is regulated accordingly
e.g. 11.1V battery, charge current approx. 4.5A
e.g. 22.2V battery, charge current approx. 2.2A
Discharge power: 5 Watts, current is regulated accordingly
Cell count : 1-15 Ni-xx / 1-6 Li-xx / 1-10 Lead acid cells (2~20V)
Current drain for balancing li-xx: 300mA
Charge termination Ni-xx: Automatic, negative Delta Peak method
Charge termination Lead acid & Li-xx: Automatic, voltage dependent, CC-CV process
Dimensions: 280x170x50mm
Net weight: 785g |
|
HobbyKing 350w 25A Power Supply (100v~120v) |
|
$ 67.99 USDSKU: T-25PS-110 Show the HobbyKing colors with pride at your local field with the HobbyKing 350W 25A power Supply. Light weight and compact, this power supply features dual 13.8v outputs and is suitable for 2 chargers up to 350w (Combined). The HobbyKing 350w Power Supply also features over current and over temperature protection and warning LEDs. |
|
25A 14v DC Power Supply for Chargers (350W) |
|
$ 79.00 USDSKU: A30
An excellent solution for power hungry chargers. The charger will suit 100-240v 50-60Hz home power points. The plug uses a common kettle type, so it will be easy to source a local power cord, or an adapter for the USA style plug. |
|
20A twin 12v switching DC Power Supply for Chargers |
|
$ 69.99 USDSKU: A20S An excellent solution for power hungry chargers. This PSU has a selectable mains input switch and will suit 100-240v 50-60Hz home power points. |
|
Turnigy T-20Pro Quality 16A Power Supply 180~240V (220W) |
|
$ 59.99 USDSKU: T-20PS Turnigy T-20Pro can supply a constant and solid 16A at 14v. The charger will suit 100-240v 50-60Hz home power points. The plug is a common kettle/laptop type, so it will be easy to source a local power cord. |
|
Turnigy 1080W 100~120V Power Supply (13.8V~18V - 60amp) |
|
$ 184.39 USDSKU: 9052000001 Serious power for heavy duty charging! The Turnigy 1080W power supply features adjustable power output (13.8V to 18V DC) making it an extremely versatile power supply. This power supply also features four outputs and is suitable for powering 4 chargers up to 1080W (combined). The HobbyKing 1080W power supply also features over current and over temperature protection and warning LEDs. This unit is ideal for running multiple chargers without the need for having separate power supplies. It is also perfect for powering high wattage chargers to charge at high rates or parallel charge multiple batteries. Specs: |
|