Briefcase Portabble Ground Station Combo 001
|
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
|
|
The portable ground station with GlobalHawk UAV COMBO 002
|
COMES with
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 GlobalHawk UAV w/70mm EDF Kit
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
Required. Your own 4 Channel TX & RX 4x9g 28mm Inrunner or Outrunner Brushless EDF motor, 3.17mm shaft 40A~60A ESC 2200mAh 3s~4s Lipoly Battery
|
|
The portable ground station with Predator UAV 74in Spy Plane ARF COMBO 003
|
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 Predator UAV 74in Spy Plane ARF
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
Required. Your own 4 Channel TX & RX 4x9g 28mm Inrunner or Outrunner Brushless EDF motor, 3.17mm shaft 40A~60A ESC 2200mAh 3s~4s Lipoly Battery
|
|
The portable ground station with FPV / UAV Fiber Glass Kit V2 Plane ARF COMBO 004
|
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 FPV / UAV Fiber Glass Kit V2 Plane ARF
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 SONY 540-Line 22x22mm CCD Camera (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
Required. Your own 4 Channel TX & RX 4x9g 28mm Inrunner or Outrunner Brushless EDF motor, 3.17mm shaft 40A~60A ESC 2200mAh 3s~4s Lipoly Battery
|
|
The portable ground station with RC Heli Camera Mount Kit S-1000 (3 Axis control) COMBO 005
|
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 RC Heli Camera Mount Kit S-1000 (3 Axis control)
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
|
|
The portable ground station with RC Heli front-mounting Camera Mount Kit S-902 COMBO 006
|
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 RC Heli front-mounting Camera Mount Kit S-902
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
1 High Landing Gear for T-REX 600/700
1 Tail Battery Mount for T-REX
|
|
The portable ground station with FatShark 5.8Ghz Telemetry System (Incl. Tx/Rx) COMBO 007
|
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 FatShark 5.8Ghz Telemetry System (Incl. Tx/Rx)
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
|
|
Briefcase size Portabble Ground Station Super COMBO 008/
|
FREE RC Camera Mount Kit S-550
The portable ground station is used for FPV flying or Aerial Photography system to simplify most stuff. Users can easy move, set up and get every things ready quickly. Usually, the FPV or Aerial Photography ground system at least needs a monitor, antenna, batteries (for monitor and receiver), AV receiver and many wires. That stuff is also with standalone power input, AV input/output... Users always waste time on things of plug/unplug. The ground station integrate 7'' LCD monitor, 1.2G AV Tx/Rx, antenna, sun hood, one Video-in, one Video-out, one extra power input and also build-in battery (not included) and power monitor. Users can monitor via the build-in 7'' LCD and record (via the video-out port) in same time. Other impartment feature is user can set it on standard camera stand. In case, you may not want to sit and operate it or you can't found somewhere to put it on. The ground station build-in an adaptor, you can connect it on any standard camera stand. (Recommend use strong one, the weight is around 3kg).
COMES WITH
1 RC Heli front-mounting Camera Mount Kit S-902
1 12V 18Ah Power Pack w/ Charger
1 eLogger V4 w/Integrated Connectors 100 Amps
1 HORNET OSD
1 Optical RPM Sensor For eLogger V4, V3 & V2
1 GPS-V4 Expander Module (10-Hz)
1 Antenna Tracker for Eagletree System
1 Briefcase size Portabble Ground Station (without Tx/Rx)
1 FatShark Pan/Tilt CAM system, pre- assembled (NTSC)
1 1.1G~1.3G Directional Panel Antenna 14dBi
1, High Landing Gear for T-REX 600/700
1, Tail Battery Mount for T-REX
2, Fatshark FPV - Headset Battery 7.4v 1000mah
1 FatShark 5.8Ghz Telemetry System (Incl. Tx/Rx)
2 1.2G 1500mW AV Tx/Rx Set [68019990]
1, N to SMA connector + 5M Cable [71050999]
1. 7'' 800x400 TFT LCD Monitor
[32081820]
2. FatShark RCV922CAM PAL Sony 420TVL w/ Spare lens Cam003
1, 1.2Ghz Low Pass Filter for solving the issue with 2.4GHz RC Syst
[13403999]
3, FY-30A new Aircraft stabilizer & cam stabilizer (Metel Case)
[FY-30A_C]
4, RC Camera Mount Kit S-550
[61051003]
2, Manfrotto 732CY M-Y Carbon Basalt Tripod w/484RC2 Ballhead
2, Manfrotto 486RC2 Ball Head
2, Camera Mount Screw (S) [80210108]
8, Hitec Micro Servo(HS-82MG) 32082S
1, 380-Line CMOS Mini Camera (NTSC) 293AC_N[293AC_N]
1, Sun Visor for 7'' TFT LCD Monitor [80810036]
1, 6-Channel DSMX receiver
1, RC Heli Camera Mount Kit S-1000 (3 Axis control)[10229905]
1, 1 4 Blade Scale Rotor Head (Flapping Hinge 600 Size
1, Camera Mount Screw (R) [60410108]
1, Camera Mount Screw (S) [80210108]
1, Flymentor 3D helicopter stabilisation System FMentor-3D
1, FPV Transmitter Tray Combo
[30010037_all]
1, XG6 6-channel DMSS Transmitter with RG631B Receiver JRP00619
3,
|
|
|