HXT900 9g / 1.6kg / .12sec Micro Servo
|
SKU: HXT900
HXT900, one of the most famous and the best value micro servos available.
Used by tens of thousands of hobbyiests world wide. The HXT900 is the #1 trusted low cost 9g servo.
Size : 21x12x22 mm / 0.74x0.42x0.78 in
Voltage : 3v ~ 6v
Weight: 9g / 0.32oz
Speed : 0.12 sec/60(4.8V)
Torque : 1.6 kg-cm
Working Temp : -30C~60C
Teflon Bushing, 15cm wire, coreless motor
Servo arms & screw included
WARNING
These servos can be found on eBay and other asian sellers at close to this price, however be warned, they do not contain Taiwan/Japan components. HexTronik (the manufacturers of these servos) have two standards, one is for local sale, and the other is export quality with imported connectors and resin gears from Taiwan and Japan.
Our HXT500 and HXT900 are export only, and not built for the domestic market. You will not find the same quality servo for less, anywhere!
|
| |
Turnigy TG9e 9g / 1.5kg / 0.10sec Eco Micro Servo
|
SKU: TG9e
THE WORLDS LOWEST COST (RELIABLE) SERVO
The TG9e boasts the same performance as other servos 10x the price with a .10sec travel time and up to 1.5kg in torque and an ultra narrow dead bandwidth!
The TG9e performance is on par with the famous HXT900, however the TG9e isnt as resistant to crashes or over-loading.
Please always ensure your control surfaces are bind free.
Spec.
Dimension: 23x12.2x29mm
Torque: 1.5kg/cm (4.8V)
Operating speed: 0.10sec/60 degree
Operating voltage: 4.8V
Temperature range: 0-55C
Dead band-width: 7us
Important.
The TG9e does not have the same strength and longevity as the HXT900.
Please ensure your control surfaces are bind-free and always check servos after a hard landing or crash!
|
| |
HXT 6.9kg / 39.2g / .16sec Twin bearing servo
|
SKU: HX5010
The Hextronik 5010 servo wont break any records, it wont astound you with its amazing torque or scare your friends with its ninja-like high speed action, but it is a solid, reliable plastic gear servo thats economical and great for those that are not too serious about specification.
Dimentions: 40x20x38mm
Weight: 39g
Speed: .16sec/60Deg
Stall Torque: 6.5kg
Dead Bandwidth: 4us
Voltage: 4.8~6v
|
| |
Corona 939MG Digital Metal Gear Servo 2.7kg/ 12.5g/ 0.13sec
|
SKU: DS939MG
Corona 939MG Digital Metal Gear Servo 2.7kg/ 12.5g/ 0.13sec
Model: DS939MG
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.14sec.60º/ 0.13sec.60º
Stall Torque: 2.5kg.cm / 2.7kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 12.5g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: Metal
Connector wire: 215mm
Operating Temperature Range: -20J+60J
|
| |
Corona 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec
|
SKU: CS929MG
Corona 929MG Metal Gear Servo 2.2kg/ 12.5g/ 0.10sec
Model: CS929MG
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.12sec.60º/ 0.10sec.60º
Stall Torque: 2.0kg.cm /2.2kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 12.5g
Dead Band: ≤3uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: Metal
Connector wire: 215mm
Operating Temperature Range: -20J+60J
|
| |
HK15178 Analog Servo 10g / 1.4kg / 0.09s
|
SKU: HK15178
Dont let the price fool you. This is a decent analog servo and the colour is, well, different.
No longer will you goose step to the blue or black servo crowd, get a HobbyKing HK15178!
Spec:
Torque: 1.2kg/cm @ 4.8v, 1.4kg/cm @ 6v
Weight: 10g
Speed: 0.10/60deg @ 4.8v, 0.09/60deg @ 6v
Voltage: 4.8v~6v
Plug: JR
|
| |
Corona Digital Servo 2.2kg / 12.5g / .11sec
|
SKU: C-DS-929MG
Hobby King Digital Servos might cost more than an analog, but for precise control and minimal dead-brand width, they are an excellent choice.
Features.
Ball bearing support
Programmable Digital, with MOSFET Drive
Metal gearing
High Speed & High Torque
Spec.
Speed: .11sec/60deg @ 4.8v
Stall Torque: 2.2kg.cm @ 4.8v
Standing Torque: 2.2kg.cm/5deg hold out!!
Weight: 12.5g
Size: 22.5x11.5x24.6mm
|
| |
HK15138 Standard Analog Servo 38g / 4.3kg / 0.17s
|
SKU: HK15138
HK15138 Standard Analog Servo
Spec.
Torque: 3.8kg @ 4.8v, 4.3kg @ 6v
Weight: 38g
Speed: 0.21 / 60deg @4.8v, 0.17 / 60deg @ 6v
Voltage:4.8v~6v
Plug: JR Style
|
| |
Corona 928BB Servo 2.0kg/ 9g/ 0.13sec
|
SKU: CS928BB
Corona 928BB Servo 7.0kg/ 53g/ 0.13sec
Model: CS928BB
Operating Voltage: 4.8V / 6.0V
Operating Current: 200mA / 240mA
Operating Speed: 0.14sec.60º/ 0.13sec.60º
Stall Torque: 1.8kg.cm / 2.0kg.cm
Size: 22.5X11.5X24.6mm(0.88"x0.45"x0.96")
Weight: 9g
Dead Band: ≤5uSec
Operating Travel: 40º/one side pulse traveling 400us
Potentiometer: 2 slider/Direct Drive
Ball bearing: MR85
Gear: Plastic
Connector wire: 215mm
Operating Temperature Range: -20J+60J
|
| |
BMS-621DMG+HS High Speed Digital Servo (MG) 7.2kg / .10sec / 46.5g
|
SKU: 621DMG-HS
BMS-621DMG+HS High Speed Digital Servo (Metal Gear)7.2kg / .10sec / 46.5g
Double ball bearing (Si-oil)
CE Certified Strong 3 Pole Motor
Heavy duty sealed water proof case
Alloy heatsink
Digital signal design with 100% fitting square PWS
Automatic measures central ms
ALU 6061 alloy and C95 gear material
Digital IC (SOP package with 12bits transfer data)
MOS-FET driver (spirited driver able to push over 7A power)
Weight: 46.5g / 1.66oz
Dimensions: 40.5 x 20 x 38.5mm / 1.60" x 0.78" x 1.54"
Torque At 6.0V: 7.2kg/cm , 109 oz/in
Speed At 6.0V: 0.10 sec / 60° at no load
Operating voltage: 4.8 - 6.0V
|
| |
HKS-9650 High Speed Servo 2.3kg/ 25g/ 0.08sec
|
SKU: HKS9650
A quality analog 25g servo for helis and planes up to .40 size. Excellent accuracy and great centering.
You wont find a better quality servo at anything close to this price.
Spec.
Type: Ball bearing
Gear: Plastic
Speed @ 4.8V: 0.10 sec/60 degree
Speed @ 6.0V: 0.08 sec/60 degree
Torque @ 4.8V: 2.0 kg-cm
Torque @ 6.0V: 2.3 kg-cm
Size: 35.5 x 15 X 28.6mm
Weight: 25g
|
| |
7g RC Servo
|
Item# 60P-DY-1002
Weight: 7g/0.31oz
Torque: 4.8V 1.6kg-cm
22oz-in
Speed: 4.8V/0.12sec/60"
Size(mm) 24X11X24
Size(in) 0.9X0.4X0.8
Content Package: 2pcs 7 gram sub micro servos
|
| |
.jpg)
