AV / Power Cables for FPV
This AV / power cable features a 4 pin molex plug on one end with standard RCA style plugs (audio/video), a power input and a power output lead on the other end. This cable will allow you to power and output audio/video from your FPV system.
Specs: Length: 200mm
The Multi-Remote Switch is essential for all R/C models, car/boat/heli or plane. Dont worry if you dont have a professional transmitter to control your FAA lighting or bomb drop system, with the Multi-Remote system you can control 7 Remote switches at the same time, plus its very easy to use. You just need 1 spare channel on your receiver and the system controls 9 different outputs.
Great for controlling LED lighting, rocket launches, bomb drops or other on/off circuits.
Spec. Input voltage: 6~12V Weight: 15g
IN STOCK ADD TO CART
Eagle Eyes FPV Ground Station
The EagleEyesTM FPV Station integrates four of the main components you need for Model Airplane FPV on the ground, at a cost that's lower than many of the individual components presently available! New: now includes clear plastic case with removable top, and mounts for the PowerPanel LCD display.
IN STOCK $89.99 ADD TO CART
ImmersionRC EzUHF Transmitter 600mW
The Immersion EzUHF Transmitter offers reliable long-range FPV/UAV model control with an output of up to 600mW. Over one year of development, testing and refinement was invested in the EzUHF line of products.
Robust FHSS link The robust FHSS (Frequency Hopping, Spread Spectrum) link hops to a new frequency every 22ms. This increases the robustness of the link, and makes it immune to most sources of interference.
IN STOCK $209.99ADD TO CART
ImmersionRC EzUHF 8-channel Diversity Receiver
The EzUHF 8 channel diversity receiver is a compact 8CH receiver for use with the ImmersionRC EzUHF system. It can provide long range control of your FPV model with the robust interference rejection that diversity antennas provide.
Compact Long-Range R/C Receiver Ideal companion to the EzUHF transmitter. Sensitive receiver, with twin antenna inputs, in a diversity configuration. Fits the most slender of glider fuselages.
Interference Rejection Each antenna input contains a 7-section ceramic low-pass filter, which silences interference from nearby high-power video transmitters on 900/1.2/2.4/… bands. Attenuation at 900MHz is > 40dB, at 2.4GHz > 75dB, right at the antenna input.
IN STOCK $124.99ADD TO CART
FPV Flight Simulator Joystick - FPV 1.5 Interface - X-Gyro 1500
The FPV Joystick System can control up to 4 channels on your FPV RC model! This makes for a great way to experience the ultimate in FPV by giving you the feel of flying your model with a real flight stick.
Included is the USB connector, FPV system 1.5 for connecting the system to the trainer port of your radio and also the X-Gyro 1500 head tracking gyro. The joystick can be connected to your radios trainer port for precisely controlling up to 4 channels. Also works in conjunction with the included X-Gyro head tracker for realistic FPV flight.
Joystick Features: Ergonomic, ambidextrous stick with trigger and five buttons-all positioned for instant access in the heat of a battle. Pinkie switch operates as a normal control or can be programmed as a "Shift Button" to double up your control functions. Throttle lever for smooth, realistic engine control Twist action rudder control Unique removable legs for easy storage Supported by Saiteks powerful SST programming software
Spec: Power consumption max: 250mW Power supply: 5V DC
Includes: FPV Joystick FPV 1.5 System Interface X-Gyro 1500 Head Tracking Gyro All Required Connection Cables
IN STOCK $159.29ADD TO CART
RG58 patch cable SMA Male to N Male (10 Meter)
RG58 patch cable SMA Male to N Male
Spec. Cable: RG58 Length: 10 meter Plug: SMA male to N male
IN STOCK $7.70 ADD TO CART
Micro Camera with LED Lamp 420TVL
|
|
This 420TVL Micro Camera with LED is perfect for FPV applications. The included LED ring provides visibility in dark conditions. This unit is a great low cost option for your FPV model.
Specs: Pixel: 400000 Resolution: 420 lines Illumination: 0.1 LUX Lens: 2.78mm Angle: 62 degrees Power: 3.5~5V DC Voltage: 100mA Connection: Red = positive Black = negative Yellow = video White = LED Weight: 2g
IN STOCK $18.49 ADD TO CART |
900MHZ 1500mW Tx/Rx & 1/3-inch CCD Camera NTSC
12 Channel 900Mhz Tx/Rx video system with CCD camera.
A high power 1500mW Tx on 900mHz ensures a very long signal range!
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage. If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
Included. 1 x SONY CCD 1/3inch Camera 1 x 900Mhz 8 channel Video Transmitter (1500mW)
1 x 900Mhz 12 channel Video Receiver
IN STOCK $102.18 ADD TO CART
900MHZ 100mW Tx/Rx & 1/3-inch CCD Camera NTSC
12 Channel 900Mhz Tx/Rx video system with CCD camera. Great for FPV systems in countries with ristrictive RF power output. The 100mW system is legal in most countries.
Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage. If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
Included. 1 x SONY CCD 1/3inch Camera 1 x 900Mhz 8 channel Video Transmitter (100mW)
1 x 900Mhz 12 channel Video Receiver
Eagle Tree Video OSD Pro Expander
An exciting and creative way to include data in your flight videos. Eagle Tree OSD Pro system is completely modular. Simply use your eLogger or Data Recorder, the OSD Pro Expander, and any additional sensors you want to display.
IN STOCK $80.99 ADD TO CART
MicroPower V4 E-Logger
EagleTree MicroPower E-Logger NEW: Eagle Tree continues to innovate in data collection with the eLogger V4. In addition to greatly enhanced resolution and accuracy, the V4 now supports voltage to 80 volts, current to 100 amps (150 amps optional), GPS (with optional GPS Expander), 5 x the logging capacity of the V2, Three Temperatures, and Throttle Logging (or logging of two RPMs)!
Here are the key features of the MicroPower:
- Logs pack current to +/- 100 amps and voltage from about 4.5 volts to 45 volts
- Current is measured with a true Hall Effects Sensor - NOT a resistance shunt!
- Great for bench monitoring of battery charging also!
- NEW: Accepts optional inexpensive sensors for Temperature, RPM (brushless, magnetic or optical), Airspeed, Altitude, Servo Current, Throttle Movement, and more, available below
- All data is logged to permanent memory, which retains the data even when the power is removed
-
IN STOCK $47.97 ADD TO CART
|
DIY Bixler FPV Camera Mount
This simple ply wood FPV Camera mount is easy to assemble and install. The flat bed allows for multiple types of cameras and/or pan & tilt setups to be mounted along with your FPV transmitter of choice. Create your own plug and go FPV setup that drops right in to the Bixler without the need to modify the airframe in any way. Two strong rubber bands have been included to ensure a positive and secure fit every time. Inspired by Stevens design.
Features. Light weight simple design. Easy to assemble and customize. Shallow flat bed design keeps your camera setup lower reducing drag. Plug and go installation, no need to modify your Bixler.
Includes. Laser cut ply wood components. 2 x Mounting rubber bands.
IN STOCK $3.99ADD TO CART
ImmersionRC EzUHF 8-channel Receiver (Lite Edition)
The EzUHF 8 channel receiver (lite edition) is a super lightweight 8CH receiver for use with the ImmersionRC EzUHF system. It can provide long range control of your FPV model.
Compact Long-Range R/C Receiver Lightweight, single-antenna version of the 8 channel receiver with a similar feature set.
IN STOCK $109.99ADD TO CART
FPV Tilt Camera Mount with Landing Gear
The HobbyKing FPV tilt camera mounting system is a simple and easy way to mount your camera. Suitable for 450~500 class helicopters and made from light weight fibre glass material. The mounting plate features adjustable screw locations for mounting your heli and for relocating the camera mount to attain correct CoG. Kit includes screws, ball sockets, connection rods, linkages and pre-cut fiberglass board.
Spec:
Height: 185mm (to mounting plate) Skid width: 190mm Skid length: 290mm Camera mount area width: 110mm Camera mount area height: 100mm Dry Weight: 188g (not including servo)
Material: Fibre GlassRequired: 1 x 9g Servo
IN STOCK ADD TO CART
X-Gyro 500 Single Axis Head Tracking system.
The X-Gyro 500 is a simple single axis head tracking system that can be used to track head movement to for controlling an on board camera in an FPV system.
Specs. Voltage: 8~12v Weight: 20g Range: +/- 90degree
Compatible Transmitters. FUTABA: (FF-7, FF-8, FF-9, T9Z, T12MZ, T14MZ) Graupner: (MC20, MC24, MX22) Multiplex transmitter: (Royal Evo, Cockpit SX, mc4000) JR and other transmitters without programmable channel: (9303, 9X)
Note: A user manual can be downloaded from the files tab.
IN STOCK $35.42ADD TO CART
Hobbyking OSD Connecting Wire Set
Spec. Length white wire - 410mm / yellow wire - 220mm
IN STOCK $3.94 ADD TO CART
Antenna for 5.8GHz FPV 16dBi Directional
Extend the range of your FPV system with this directional high-gain 5.8ghz antenna.
Specs: Frequency: 5150-5850 MHz Bandwidth: 700 MHz VSWR: ≤ 1.5 Gain: 16 dBi Rated Power: 500W Input Impedance (Ω): 50 Connector: N Female Size: 250×220×50mm Weight: 500g
*Includes pole mount bracket.
IN STOCK $32.83 ADD TO CART
1/3-inch SONY CCD Video Camera (NTSC)
The camera uses a quality glass lensed SONY CCD system.
Included. 1 x SONY CCD 1/3inch Camera
Camera spec.
CCD sensor type:1/3 color SONY CCD Pixel; NTSC: 510(H)*492(V) (Included) PAL: 500(H)*582(V) Scanning system: Interlaced scanning Synchronization: System:Inter Horizontal resolution: 420TV line Minimum Illumination 0.01LUX/F1.2 DSP+CCD: CXD3142R+405AK S/N Ratio: 48dB Gamma Modification: 0.45 White balance: Auto Auto backlight compensation: Auto Lens: 3.6MM Audio: No Input voltage: 9~12.6V Electric current 80MA Electronic Shutter: 1/50 (60) ~ 1/100,000s Video output: 1.0VP-P composite video Operation Temp.: -20~50 Size: 38*38mm
Flight time: Approx 60min/100mah 3S
IN STOCK $16.99 ADD TO CART
2.4GHZ 1000mW Tx/Rx & 1/3-inch CCD Camera NTSC
12 Channel Tx/ Rx video system with CCD camera. The camera uses a quality glass lensed SONY CCD camera system and a high power 1000mW transmitter. Unlike other generic systems, we have produced a wiring loom and included it with the camera so that the Tx and camera will be compatible and on the same voltage. If you buy your camera and Tx seperately the plug polarity and voltages may be very different.
Included. 1 x SONY CCD 1/3inch Camera 1 x 2.4GHz 12 channel Video Transmitter (1000mW)
1 x 2.4GHz 12 channel Video Receiver
IN STOCK $99.99 ADD TO CART
FatShark RCV922CAM PAL Sony 420TVL w/ Spare lens
Camera Type: Colour PAL Signal System: PAL/NTCS Pick Up Device: 1/3 Sony Super HAD CCD Pic Elements: 510(h) x 582(v) Resolution: 420TV Lines Min Illumination: .3 Lux Gain: Auto White Bal. : Auto Lens: 3.6mm + 2.8mm spare Dimensions: 27x25mm Weight: 31g Power: 200mA
hark RCV922CAM PAL Sony 420TVL w/ Spare lens
IN STOCK $59.99 ADD TO CART
GPS Expander for R/C V4 DataRecorder
New GPS Expander Module based on the latest GPS technology. Built-in LED which indicates 3D fix. Fast 10Hz update rate. Built-in battery backup for quick fixes.
Plugs into the eLogger V4 to provide live and/or recorded lat/lon, ground speed, GPS altitude, distance to pilot, course, UTC timestamp, and more. Integrated display/3D graphing software included in data system. WAAS and EGNOS compatible, built-in patch antenna.
NOTE: if you plan to use the GPS with your eLogger with 8S (approximately 30V) packs or higher, the Battery Backup Harness (CAB-BAT-BACK) is required.
Manual can be found below; http://www.eagletreesystems.com/Support/Manuals/GPS%20Expander%20Manual.pdf
IN STOCK $71.99 ADD TO CART
EagleTree MicroPower E-Logger V4 with Wire Leads, 80Volts, 100 Amps
EagleTree MicroPower E-Logger NEW: Eagle Tree continues to innovate in data collection with the eLogger V4. In addition to greatly enhanced resolution and accuracy, the V4 now supports voltage to 80 volts, current to 100 amps (150 amps optional), GPS (with optional GPS Expander), 5x the logging capacity of the V2, Three Temperatures, and Throttle Logging (or logging of two RPMs)!
Here are the key features of the MicroPower:
IN STOCK $58.99 ADD TO CART
|