TURNIGY K-Force 100A Brushless ESC

ALL shipping prices are added in the productprices $

We spend alot of time ensuring the ESC's we stock are reliable and excellent value for money.
Always make sure your ESC is rated at a power level higher than your motor can handle. And always use fresh quality LiPo batteries. A low grade battery will cause the Speed Controllers FET's to overheat and eventually burn.

ESC, UBEC, VR > Heli ESC

Hobbyking SS Heli Series 50-65A ESC

The Hobbyking SS series comes with a limited range of programming functions and are designed to be plug-n-play.
A perfect ESC for those looking for something simple to use and economic.

IN STOCK $11.99

CLICK HERE

TURNIGY K-Force 40A Brushless ESC

The Turnigy K-Force series are based on an all new powerful microprocessor usually reserved for high speed car ESCs. The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.

Specification:

Output: Continuous 40A, burst 57A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
BEC: Twin voltage selection, 5.25v and 6v.
Control Signal Transmission: Optically coupled system.
Max Speed;
2 Pole: 210,000rpm
6 Pole: 70,000rpm
12 Pole: 35,000rpm
Size: 59mm (L) * 27mm (W) * 12mm (H).
Weight: 38g.
IN STOCK $28.44

CLICK HERE

Turnigy AE-30A Brushless ESC The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.

Specification:
Output: Continuous 30A, burst 35A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically coupled system.

IN STOCK $11.84

CLICK HERE

TURNIGY K-Force 120A-HV OPTO V2 5-12S Brushless ESC

The Turnigy K-Force series are based on an all new powerful microprocessor usually reserved for high speed car ESC's. The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup.
'HV' indicates this model can handle up to 12S Lipoly.

IN STOCK $114.64

CLICK HERE

Turnigy AE-65A Brushless ESC

The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.

Specification:
Output: Continuous 65A, burst 70A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
BEC: Linear 4A @ 5V
Control Signal Transmission: Optically coupled system.

IN STOCK $31.00

CLICK HERE

Otter 40A 2-3S Brushless ESC w/ 4A BEC (w/ Governor)

Otter BS40A is an advanced brushless ESC for Airplane or Helicopter with optimum features.Works with 2 - 3 cell lipo and also have LED indicating brake/Timing modes, also switchable governor mode for helicopters, voltage cutoff and heat protection.

Specification:

Current: 40A
Battery: 2-3 Cell Lipo / 6-10 Cell Ni-XX
SBEC: 5V / 4A
Size: 53*24*13mm
Weight: 29g
IN STOCK $14.40

CLICK HERE

1s/7A ESC for ultra-micro heli

1s/7A ESC for ultra-micro heli

Dimensions: 28mm x 16mm x 4mm
Weight: 5g inc leads

IN STOCK $10.70

CLICK HERE

Turnigy AE-45A Brushless ESC

A quality SMT produced ESC with reliable components.
The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.

Specification:
Output: Continuous 45A, burst 50A up to 10 seconds.
Input Voltage: 2-6 cells lithium battery or 5-18 cells NIMH battery.
BEC: Linear 3A @ 5V
Control Signal Transmission: Optically coupled system.

IN STOCK $20.46

CLICK HERE

Turnigy AE-20A Brushless ESC

The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.

Specification:
Output: Continuous 20A, burst 25A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically coupled system.

IN STOCK $8.49

CLICK HERE

Turnigy AE-25A Brushless ESC

The Turnigy AE series are based on new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, less battery load and reduced FET heat buildup. Also there is a separate voltage regulator IC for microprocessor providing good anti-jamming capability.

Specification:
Output: Continuous 25A, burst 35A up to 10 seconds.
Input Voltage: 2-4 cells lithium battery or 5-12 cells NIMH battery.
BEC: Linear 2A @ 5V
Control Signal Transmission: Optically coupled system.

IN STOCK $10.29

CLICK HERE

TURNIGY K-Force 150A OPTO 2-6S Brushless ESC

Turnigy Monster-2000 200A 4-12S Brushless ESC

The Turnigy Monster-2000 is based on an all new powerful microprocessor.
The new CPU means ultra fast sync timing, crisper throttle response, extremely low resistance and high voltage overheat protection.

Features:

Microprocessor controlled

Extremely low resistance

200A continous(230A surge)

Up to 38cells NiMH/NiCad or 2-12 Lipo cells

High rate adjustable switching (PWM:12K Hz/18K Hz/24K Hz)

BEC: Nil

Programmable low voltage cutoff

Programmable cutoff types(soft cutoff/hard cutoff)

Programmable brake type(disable/soft brake/hard brake)

Time advance programmable (low/standard/high)

Programmable current limiting(very sensitive/standard/insensitive/disable)

Governor mode(low rpm governor/high rpm governor)

Programmable Constant Power startup type(very soft start/soft start/fast start)

Thermal Protection(100 centigrade)

Apply to most of inrunner and outrunner brushless motors.

No complex programming, auto adapt work mode.

Safe"power on" arming program ensures motor will not accidentally turn on.

Auto shut down when signal is lost or radio interference becomes severe for more than 3 seconds .After radio connection has been reestablished, moving the throttle to the lowest position can restart the motor.

The ESC is disabled when the voltage is over 51v at power-on.
IN STOCK $179.99

CLICK HERE

Brushless 10A ESC for Micro HelicopterBrushless 10A ESC for micro helicopter such as MCPX etc.

Specs:
Amps: 10A
Cells: 1~2S
Voltage: 3.7~7.4V
Cutoff voltage: 3V/6V
Frequency: 8Khz
Governor: yes
Weight: 2.8g
Size: 21.2x12.6x5.8mm

IN STOCK $13.65

CLICK HERE

ESC, UBEC, VR > Boat ESC

Turnigy Marine 35A Brushless Boat ESC

TURNIGY marine ESCs are built with USA IR mosFETs for long run times and less heat.
Boat escs have a different requirement to air or car escs. Their need for sustained high-amp draw makes plane escs unsuitable and car escs with large amp spike capability, unnecessary.
Thats why TURNIGY marine escs are designed purely for boats, and coated in anti-static then water resistant laquer to prevent shorting should the esc get wet. They can handle sustained high amp/volt loads and handle heat better than a car or plane esc.

What makes this ESC better than others?
-Well designed MCU, with efficient code makes for faster sync and accurate timing.

-Fast clock cycle MCU combined with efficient code means 100,000rpm cpu cycle*
-Efficient FETs reduce heat and deliver sustained switching at high amp/voltage.
-Well designed PCB (6 layer) and circuit diagram handles high-amp without burnout.
-Large motor comptability. Smooth starts, linear throttle curve.

-Active water cooled heatsink that actually works.
IN STOCK $25.71

CLICK HERE

Turnigy AquaStar 120A Water Cooled ESC

Ultra fast microprocessor controlled and extremely low resistance circuit and chip design, water-proof PCB, and aluminum water-cool heatsink for better thermal dissipation are just some of the features in the new TURNIGY Aquastar range of brushless boat speed controllers.
The AquaStar brushless esc is a high performance ESC capable of standard and competition use.

Full protection, include signal loss, temperature, and motor jam protection. Programable by USB on a PC or by your Tx.
Compatible to use with all radio systems.
IN STOCK $52.20

CLICK HERE

Turnigy AquaStar 100A Water Cooled ESCUltra fast microprocessor controlled and extremely low resistance circuit and chip design, water-proof PCB, and aluminum water-cooled heatsink for better thermal dissipation are just some of the features in the new TURNIGY Aquastar range of brushless boat speed controllers.
The AquaStar brushless esc is a high performance ESC capable of standard and competition use.

Full protection, include signal loss, temperature, and motor jam protection. Programmable by your Tx.

Compatible to use with all radio systems.

IN STOCK $41.57

CLICK HERE

Hobbyking SS Boat Series 125A ESC

The Hobbyking super simple boat series comes with a limited range of programming functions and are designed to be plug-n-play.

A perfect ESC for those looking for something simple to use and economic.

Spec.
Weight: 107g
Size: 90x41x18mm
Cells: 2-7S Li Po
Continuous Current: 125A
Burst : 150A
Bec: No BEC (Opto)
Reverse: Yes

IN STOCK $29.77

CLICK HERE

Birdie 70A Brushless Boat ESC w/5A BEC

The Birdie range of ESCs are.. well.. CHEEP! CHEEP!

No frills (or feathers) here, just great value for money! Each and every Birdie ESC is QC checked by Hobbyking and placed under a 2 minute load test ensuring your Birdie will be ready to fly!

If your looking for an ESC with basic features and reliability at a bargain price you better bag a Birdie before they all fly the coop!

*This Birdie is the boat version which features water cooling.

IN STOCK $17.97

CLICK HERE

Turnigy AquaStar 90A Water Cooled ESC

40A Water Cooled Brushless Boat ESC w/3A BEC40A Water Cooled Brushless Boat ESC w/3A BEC

Specs:
Weight: 43g
Size: 67x13.5x26mm
Cells: 2-4S
Max Current: 40A
Burst Current: 43A
BEC: 3A
Timing: 10º/20º/30º programmable
Cooling: Water cooled

IN STOCK $16.22

CLICK HERE

Turnigy Marine 180A Brushless Boat ESC

What makes this ESC better than others?
-Well designed MCU, with efficient code makes for faster sync and accurate timing.

-Fast clock cycle MCU combined with efficient code means 100,000rpm cpu cycle*
-Efficient FETs reduce heat and deliver sustained switching at high amp/voltage.
-Well designed PCB (6 layer) and circuit diagram handles high-amp without burnout.
-Large motor comptability. Smooth starts, linear throttle curve.

-Active water cooled heatsink that actually works.

IN STOCK $77.73

CLICK HERE

Hobbyking SS Boat Series 200A ESC

The Hobbyking super simple boat series comes with a limited range of programming functions and are designed to be plug-n-play.

A perfect ESC for those looking for something simple to use and economic.

Spec.
Weight: 128g
Size: 90x41x23mm
Cells: 2-4S Li Po
Continuous Current: 200A
Burst : 220A
Bec: No BEC (Opto)

IN STOCK $38.38

CLICK HERE

Birdie 100A Brushless Boat ESC w/5A BEC

ESC, UBEC, VR > Car ESC

Turnigy TrackStar One Cell 120A 1/12th And 1/10th Scale Sensored Brushless Car ESC

The Turnigy TrackStar One Cell 1/12th and 1/10th scale ESC is the latest addition to Hobby Kings Sensored Car ESC range.

The TrackStar One Cell features a built in voltage booster for single cell Lipoly use in 1/12th and 1/10th scale racing. An additional heat sink and cooling fan have been included for 2S 1/10th race applications making the TrackStar One Cell a truly versatile ESC.

Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar One Cell 120A ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feed back from the motor. This translates in to very smooth start up and acceleration.

IN STOCK $62.95

CLICK HERE

Turnigy TrackStar 120A Brushless Short Course Truck ESC

The Turnigy TrackStar 120A Short Course ESC is the latest addition to our TrackStar ESC range. Its optimized for use with 4 pole motors which are becoming quite popular in the Short Course truck class, but of course works well with any sensorless brushless car motor.

Using a Fast Silicon Labs MCU and high quality On-Semiconductor MOSFETs the TrackStar 120A SC ESC sets a new standard in high quality yet affordable car ESCs. With Intelligent MCU logic the TrackStar series ESCs allow extremely precise start up control and positioning feedback from the motor. This translates in to very smooth start up and acceleration.

The Turnigy TrackStar 120A SC ESC also boasts a host of programming options not usually found in an ESC at this price and can be programmed with ease via the Turnigy TrackStar programming card (sold separately). The Turnigy TrackStar 120A SC ESC also includes 3 x 12AWG motor wires and 2 x 12AWG power input wires.

This ESC comes with 3.5mm bullet plugs pre-installed so you can connect your motor straight away.

IN STOCK $52.99

CLICK HERE

Turnigy Brushless ESC 35A CAR ESC

The Turnigy series boasts features such as large burst currents, programmable breaking and reverse, low resistance, 2-3 Lipo cell capable and low weight.

Spec.
Cont. Current: 35A
Burst Current: 190A
Resistance: 0.0015ohm
Car Size: 1/10
Suggested Motor: Around 9T / 3650kv
Battery: 2-3 Cell Lipo / 4-9 Cell Ni-XX
BEC: 6V/ 1.5A Output
Motor Type: Sensorless Brushless
Size: 31.5*27.5*24mm
Weight: 30g

IN STOCK $24.99

CLICK HERE

Turnigy 160A 1:8th Scale Sensorless ESC w/Fan

Specs.
Input Voltage: 3~5 Cell Lipoly
Operating Current: 120A (160A Peak)
LVC Cut-off: Autodetect (3.2v/Cell)
Over input voltage protection: Above 5S
Thermal Protection: 95deg C
Lost RX Protection: Yes, Delay 0.5sec
BEC: 6v, 3A
Dimensions: 54.9x47x36mm
Weight: 116g

IN STOCK $47.88

CLICK HERE

ESC, UBEC, VR > VR / UBEC

HXT UBEC 5/6v output, 5.5~23v InputhexTronik UBEC.
Will supply a solid 5v or 6v to your reciever with a 2 to 5S Lipoly pack.
Specifications;
Output: 5v/3a & 6v/3a (Selectable via jumper)
Ripply: <50mVp-p(@2A/12V)
Input: 5.5v~23v (2 to 5s)
Size:41.6mm*16.6mm*7.0mm
Weight: 12.5g

IN STOCK $6.88

CLICK HERE

Turnigy 5A (8-26v) SBEC for Lipo Turnigy 5A SBEC is an advanced switching DC-DC regulator which will supply a constant 5A. It works with 2 - 7 Cell Lipoly pack and supplies a constant 5 or 6v to your receiver and is interference-free

IN STOCK $4.55

CLICK HERE

Turnigy 3A UBEC with Low Voltage Buzzer

Designed and manufactured by HobbyKing, this handy UBEC features a built in safety buzzer to warn you if your input power source drops below 6v.

IN STOCK $3.79

CLICK HERE

Turnigy 3-in-1 Heli 5A UBEC & Low Voltage Alarm (3~6S

The Turnigy 3-in-1 Heli UBEC is a great choice for your favorite R/C helicopter. Providing 5A continuous (up to 7.5A max) output power to your electronics, an audible/visual low voltage alarm and an in-built LED power display, this UBEC is an all-in-one solution to your heli's power needs!

The on-board LEDs give you a power gauge indicating the charge condition of your input battery, while the removable super bright white LED can indicate when you have reached a low voltage condition.)

IN STOCK $13.99

CLICK HERE

Turnigy 3 Function 5 Amp Ubec Voltage Display Switch

This switch features an in built 5 Amp multi-voltage UBEC, an ultra high brightness LED voltage display which is clearly visible in direct sunshine, which displays in real time, both the UBEC input and output voltages.

Input voltage range is 6-13V, which can be directly supplied by lithium, nickel-metal hydride, nickel cadmium or A123 cells.

The UBEC output voltage is switchable between 5.2 or 6V.

IN STOCK $9.41

CLICK HERE

Turnigy Receiver Controlled Switch

Plug it into your receiver and you instantly have an on/off switch controlled by any channel on your radio.

The Turnigy switch will complete a circuit when the radio channel passes 50%. Connect it to your flap or gear channel for an instant on/off switch!
Great for custom lighting, sound or effects projects, remote glow igniters, remote starter motors or even custom smoke machines. The possibilities are endless!

Spec;
Maximum throughput : 10A / 30v
Weight: 7g
IN STOCK $6.63

CLICK HERE

igy Be Found Lost Model Beeper

This Handy unit will emit a loud beep if your reciever loses radio signal or when the voltage of your models radio system drops below 4v. Perfect for testing ground range of receivers and ensuring that your radio system has not dropped to an unsafe voltage before each flight.

Simply install the Be Found between the receiver and any servo in your radio system. The interval of the beeps may also be adjusted to your liking via the trim pot.

At this price the Be Found is a great investment for the safety of your model. Without a Turnigy Be Found you may be lost!

IN STOCK $2.49

CLICK HERE

TURNIGY 5-7.5A (8~42v) HV UBEC for LipolyPower your receiver and servos with the baddest of UBEC power solutions.
The all new Turnigy 7.5A UBEC is an advanced switching DC-DC regulator which will supply a constant 5A or more with short bursts of up to 7.5amps. The Turnigy UBEC plugs into a 3 - 10 Cell Lipoly pack and supplies a constant 5 or 6v to your receiver.
The system includes an anti-short circuit and overheat function with a thin metal shield cover, reducing noise
Also included is an Output filter to reduce noise, an on/off switch and a step down regulator adapter.
Chip efficiency is 92%.

IN STOCK $15.56

CLICK HERE

TURNIGY 8-15A UBEC for Lipoly
Power your receiver and servos with the baddest of UBEC power solutions.
The all new Turnigy 15 is an advanced switching DC-DC regulator which will supply a constant 8A or more with short bursts of up to 15amps! The Turnigy UBEC plugs into a 2 or 3 Cell Lipoly pack and supplies a constant 5 or 6v to your receiver.
Voltage status indicator lights on the pack show whether your 2 or 3 cell pack is Full, half charged or low. An excellent safety feature!
The system includes an anti-short circuit and overheat function with a thin metal shield cover, reducing noise
Also included is an Output filter to reduce noise, an on/off switch and a step down regulator adapter

IN STOCK $14.30

CLICK HERE

Turnigy Redundant Dual 8A UBEC Rx Power System

If you have ever had an ESC burn or battery suddenly drop voltage mid-flight then you will understand the importance of having a rock solid system powering your receiver and servos.
With instant failover protection the TURNIGY Redundant DUAL 8A UBEC system is an easy choice for anyone flying large scale aircraft.
The Dual 8A UBEC controller instantly switches to the second UBEC in case of a short, burnout, or power loss (faulty battery). The LED indicates #1 or #2 UBEC live status, over voltage (short) or low battery voltage.
The TURNIGY Redundant Dual 8A UBEC can be connected to one or two battery packs and provides redundancy in the case of an electronic, connection or battery failure. In most cases UBECs fail when an FET burns, shorting the circuit, frying your battery and cutting power to your receiver. This system prevents that by keeping the circuit open and switching source to the second UBEC and battery.

IN STOCK $17.95

CLICK HERE

Rc ESC, UBEC, VR